TurnSec 4.0

Two-directional and electrically lockable turnstile consisting of:

1 Rotor column made of round hollow section D88.9 mm with three rows of welded on trombone arms made of round hollow section D26.9, 120°, stainless steel, V2A, grain 240
1 Guide element with curved side elements
1 Deflecting element with curved side elements and deflecting arms D40 screwed onto the end post at the inside and outside
2 Operating posts made of rectangular hollow section 150×100 for the installation of control devices
2 End posts of the guide element as well as 1 centre post of the guide and deflecting element respectively made of rectangular hollow section 150×100
Top frame
Bottom frame hot-dip galvanised for installation with 200mm lowered foundation
Drive housing with drive and control unit WE-Tronic II
Passage height: 2140 mm
Passage width: approx. 620 mm between rotor and end post of guide element, approx. 700 mm between operating post and end post of guide element
Dimensions: H x L x W = 2630 x 1600 x 1500 mm (without roofing)
Diameter rotor: 1220 mm
Supply voltage: 230 V (1Ph + N + PE), 50 Hz
Passenger flow: approx. 15 persons/min (single release)
Weight: approx. 660 kg (without roofing)
Temperature range: -10° C …+50°C

Your configuration